If your Sharp TV remote control is not working correctly, it may be due to infrared signal problems. Check that nothing is blocking the signal between the remote and the TV. If the problem persists, try replacing the batteries or purchasing a new remote control. In that case, you can do the followings to fix this issue: First, turn off your TV and Input devices. Then, input the HDMI cable to the HDMI 1 port. Now, turn the TV and other devices on and press the input button on your remote. Then, scroll down and select HDMI 1 by pressing the up and down button on the remote. Restart your Sharp TV and check if the sound is working. Swapping Your HDMI Inputs. If you are using an HDMI cable to connect your device to your Sharp TV, you might need to swap your HDMI inputs. Certain HDMI inputs on your TV might not function correctly with sound, especially those labeled as HDMI ARC or HDMI CEC. Swapping your HDMI inputs Adjusting input settings on your Sharp TV is a breeze! You can quickly and easily configure the inputs to match up with all of your devices. To get started, you'll need to access the Input Settings menu from the Home screen. Once there, look for the option labeled Input Setting Adjustment. Check the input: Make sure the TV is set to the correct input source. Use the remote to cycle through the input options until you find the correct one. Check the cables: Ensure that all cables are securely connected to the TV and the devices they are connected to. Power Issues Check Your Remote Hard Reset Factory Reset Sharp TV Black Screen Hard Reset Video Input Check Cables and Connections Firmware Update Black and White Screen Sharp TV Remote Not Working Common Fixes Reset Your Remote Control Replace the Remote Sharp TV No Sound Output Mode Check the Input Check the Multichannel Television Sound Mode Probably you can't - these switching input and power features are part of HDMI-CEC which you have to have on for ARC to work. Aquos Link is Sharps name for HDMI-CEC. see if you can switch off different features of Aquos Link and/or CEC on the soundbar (whilst keeping the overall CEC setting as "on". My opinions expressed here do not vPWT1Wd.

sharp tv av input not working